 |
|
|
|
|
Dimti - People
Stefano Rossi |
|
|
|
Page last updated: 15/04/2009
 |
Current position |
   |
 Assistant Professor of Materials Science and Technology
Trento, 14/10/1967
Tel. +39 0461 882442
Fax: +39 0461 881977
E-mail: Stefano.Rossi@ing.unitn.it 
|
|
|
Academic career |
|
 Graduated in Materials Engineering (University of Trento, 1991)
PhD in Science and Technology of Materials (University of Florence, 1997)
Post-doc (University of Trento, 1998-1999)
Research Scientist (University of Trento, 2000-2004)
Visiting Associate Professor (Universitè D'Aix Marseille I, France, May 1999, June 2000, November 2001, Juni 2003, July 2004)
Visiting Professor (Universitade de Vigo, Spain, October 2002)
Assistant Professor (University of Trento, 2005 to present)
|
|
|
Teaching activity (last 3 years) |
|
Technology of Materials (Logistics and Production Engineering, University of Bolzano, 2000 to present)
Lectures in the courses: Corrosion and Protection of Materials and Technology and Applied Chemistry for Environment Protection (University of Trento)
Lectures in the PhD program in Materials Engineering (Dpt. Materials Engineering and Industrial Technolgies, University of Trento)
Lectures in the Master program in Metallurgy (University of Modena and Reggio Emilia)
Tutor of 32 "laurea" thesis in Materials Engineering
|
|
|
Research topics |
|
Corrosion behaviour of materials
Organic, metallic and ceramic coatings
Cathodic protection
Mechano-chemical phenomena
Electrochemical techniques
|
|
|
Top 10 Publications |
|
F. Vacandio, Y. Massiani, P. Gravier, S. Rossi, P.L. Bonora, L. Fedrizzi, “Improvement of the electrochemical behaviour of AlN films produced by reactive sputtering using various under-layer”, Electrochimica Acta, 46 (2001) 3827
S. Rossi, Y. Massiani, E. Bertassi, F. Torregrosa, L. Fedrizzi, “Low temperature plasma immersion ion implantation of nitrogen on a steel mould” Thin Solid Films, 416 (2002) 160
S. Rossi, L. Fedrizzi, T. Bacci, G. Pradelli, “Corrosion behaviour of glow discharge nitrided titanium alloys”, Corrosion Science 45 (2003) 511.
S. Rossi, F. Chini, G. Straffelini, P.L. Bonora, R. Moschini, A. Stampali,“ Corrosion protection properties of electroless nickel/PTFE, phosphate/MoS2 and bronze/PTFE coatings applied to improve the wear resistance of carbon steel”, Surface and Coatings Technology, 173 (2003) 235
F. Deflorian, S. Rossi, P. Kamarchik, L. Fedrizzi, P.L. Bonora, “Degradation mechanism of electrodeposited coatings in alkaline solution” Progress in Organic Coatings 47 (2003) 103
F. Deflorian, S. Rossi, "The role of ions diffusion in the cathodic delamination rate of polyester coated phosphatized steel". Journal of adhesion science and technology,17 (2003) 291.
S. Rossi, F. Deflorian, F. Venturini, “Improvement of Surface Finishing and Corrosion Resistance of Prototypes Produced by Direct Metal Laser Sintering (DMLS)” Journal of Materials Processing Technology 148 (2004), 301
L. Fedrizzi, S. Rossi, R. Cristel, P.L. Bonora, “Corrosion and wear behaviour of HVOF cermet coatings used to replace hard chromium” Electrochimica Acta 49 (2004) 2803–2814
S. Rossi, L. Fedrizzi, F. Deflorian, “Characterisation of commercial metallic coatings for corrosion protection of P/M parts” The Int. J. of Powder Metallurgy, 40 (2004), 33.
F. Deflorian, S. Rossi, B. Tancon, P.L. Bonora, “Corrosion behaviour of steel ropes for snow and rockfall barriers” Corrosion Engineering, Science and Technology 39 (2004) 250
The complete list of publications is available on
Polaris website 
|
|
|
Other info |
|
1993 Luigi Grifone Award of the Italian Chemical Society - Electrochemistry Division
Fellow of editorial board of Galvanotecnica e Nuove Finiture AIFM Milano
|
|
|
|
|
