DepartmentMaterials Engineering and Industrial Technologies
Italian versionEnglish versionHome pageSearchMapPeople University of Trento
up
right arrow DIMTI right arrow Scanning Electron Microscopy Laboratory - Paolo Giordano Orsini
Scanning Electron Microscopy Laboratory
Paolo Giordano Orsini
Scanning Electron Microscopy
Page last updated: 15/04/2009

Contacts

 go to indexgo upgo down
Scanning Electron MicroscopyScanning Electron Microscopy Laboratory - Paolo Giordano Orsini
Department of Materials Engineering and Industrial Technologies - University of Trento
Technical Coordinator of the Lab: Carlo Bressanini email
Tel.: 0461 882421 (direct)
0461 881919 (switchboard)
0461 881915 (Dept. Secretary)
Fax: 0461 881977
Via Mesiano, 77 - 38050 Trento - Italy

Staff

 go to indexgo upgo down
(E)SEM Group
Benedetti Luca(Laboratory of Industrial Anticorrosion) email
Berloffa Angela (Laboratory of Metallurgy and Microstructure) email
Brugnara Marco (Laboratory of Polymers and Composite Materials) email
Casari Francesco (Laboratory of Metallurgy and Microstructure) email
D’Incau Mirco(Laboratory of Metallurgy and Microstructure) email
Ischia Gloria (Laboratory of Metallurgy and Microstructure) email
Maines Lorena (Laboratory of Metallurgy and Microstructure) email
Motta Antonella (Laboratory of Polymers and Composite Materials) email
Preghenella Michele (Laboratory of Polymers and Composite Materials) email
Zadra Mario(Laboratory of Metallurgy and Microstructure) email

Major research facilities

 go to indexgo upgo down
Scanning Electron Microscope Cambridge Stereoscan 200
Operating mode:
HIGH VACUUM (HV)
MAX. VOLTAGE: 30 KV
Detectors:
Secondary electrons
Backscattered electrons
Microanalysis system LINK eXL.
X-ray detector OXFORD - B/U

Environmental Scanning Electron Microscope TMP ESEM
MAX. VOLTAGE: 30 KV
Operating modes:
HIGH VACUUM (HV), LOW VACUUM (LV), “ENVIRONMENTAL” (ESEM)
Detectors:
Secondary electrons (HV, LV, ESEM)
Backscattered electrons (HV, ESEM)
Microanalysis system EDAX FALCON.
X-ray detector EDAX - C/U

Coating deposition systems:
Au – DC sputtering
C- Joule effect evaporation